Specifications of Pick and Carry Crane
(Free on wheels)
|9 Tonnes – SWL
11 Tonnes – TL
||Simpson’s S433(I)F1 (CEV BS-III),4 cylinder, water cooled diesel engine OR equivalent engine.
||48 BHP (36KW)at 2200 RPM
||Sliding mesh with 6 forward and
2 reverse speeds and high low range selector.
||Single, dry friction, clutch plate.
||29 KMPH without load.
- Gear/Intra vane type main pump.
- Four spool control valve.
- Suction line has 100 mesh size strainer while return line is fitted with 25 micron full flow filter.
- Two double acting lift cylinders,two double acting steering cylinders and one double acting extension cylinder.
||Pneumatically assisted hydraulic brakes. Front and rear brakes are actuated through a single pedal.
Parking brake is Provided.
||Hydraulically operated with 55° articulation on either side and turning radius of 5.5Mtrs (approx)
on outer rear wheels.
||12V. Negative earth with 35 Amp.
alternator and 75 Amp hr. Battery.
|| Two part boom with hydraulically operated extension of 1800 mm
|| 10 Seconds.
|| -5° to +60°
|| 20 Seconds.
||Winch is driven by hydraulic motor
employing 4 falls of 13 mm dia rope.
||50 Mtrs./Min.(Line speed)
||10.00 x 20 -16PR (4 Nos)
||13.00 x 24 -12PR (2 Nos)
- ROPS fully enclosed wide view cabin.
- Front tyre protector.
- Front and rear work lights.
- Tool kit.
- Gauges :-
a) Water Temperature.
b) Engine oil pressure.
c) RPM meter cum hour recorder.
||Audio overload indication.
Hose failure protection.
Audio over hoisting indication.
Safety brakes on hoist.
- Fly jib.
- Steering wheel.
- Slotted boom.
- Spark arrester.
- Over hoisting hydraulic cut off.
- Safe load indicator /LMI.
- Rhino 90 (2300mm extension stroke)
- Rhino 90 T (without winch).
|| 7750 kgs.
Well laid out and ergonomically placed
controls and instrument cluster ensure
ease of operation.
Higher lifting height of 9 mtrs.
Travel speed of 29 kmph provides
faster intersite movements.
Wide view ROPS cabin with curved
windscreen for better visibility.
High ground clearance of 400mm
for easier rough terrain operation.
Bigger size front windscreen
and re-routing of hoses provide
much better front visibility.
Higher lifting capacity of 9 Tonne SWL/
11 Tonne TL.
FULL LENGTH CHASSIS
Provides better support to the power
train leading to increased stability.
Lower turning radius of 5.5 mtrs.
facilitates better maneuverability and
movement in confined spaces.
Heavy duty & robust construction.
SPARE PARTS & SERVICE
ACE has all India Sales and Service network operating out of all the major cities. These outlets are fully equipped to provide genuine spare parts and services by company trained engineers. These outlets are further supported by company officials based at Delhi, Mumbai, Chennai, Kolkatta, Ahmedabad, Pune, Jaipur, Chandigarh, Ranchi, Raipur, Indore, Bhubneshwar, Lucknow, Hyderabad, Bangalore, Guwahati, Patna, Vizag & Cochin.